NEWEST 100% FREE RCNI–100% FREE PASS RATE | LATEST RCNI EXAM FORMAT

Newest 100% Free RCNI–100% Free Pass Rate | Latest RCNI Exam Format

Newest 100% Free RCNI–100% Free Pass Rate | Latest RCNI Exam Format

Blog Article

Tags: RCNI Pass Rate, Latest RCNI Exam Format, RCNI Authorized Test Dumps, RCNI Test Duration, RCNI Pdf Exam Dump

If you feel nervous about your exam, then our RCNI exam materials will be your bets choice. RCNI Soft test engine can stimulate the real exam environment, so that your confidence for your exam will be strengthened. In addition, we provided you with free demo to have a try before buying RCNI Exam Cram. You can enjoy free update for one year, so that you can obtain the latest version timely, and the latest version for RCNI training materials will be sent to your email automatically. You just need to check your email.

RUCKUS RCNI Exam Syllabus Topics:

TopicDetails
Topic 1
  • RUCKUS Products & Solutions: RUCKUS ICX networking Engineers are expected to showcase their knowledge of RUCKUS products and solutions in this section. It focuses primarily on the ICX product line, covering various switch models and their capabilities. Candidates should be familiar with the features, specifications, and use cases of different ICX switches.
Topic 2
  • ICX Solution Troubleshooting: RUCKUS ICX networking Engineers are expected to demonstrate troubleshooting skills in this section. It covers basic networking troubleshooting techniques and procedures for performing ICX switch recovery. Candidates should be able to identify and resolve common network issues in ICX environments.
Topic 3
  • ICX Solution Implementation: This significant portion of the exam assesses the skills of RUCKUS ICX Network Administrators in implementing ICX solutions. It covers ICX software management, stacking capabilities, PoE configuration, Layer 2
  • 3 protocols, and ICX services, IPv4
  • IPv6 addressing on switch interfaces, ICX switch management methods, and configuring multicast and security features. Candidates should be able to demonstrate proficiency in configuring stacking for scalable network deployments.
Topic 4
  • Foundational Networking Concepts: This section of the exam measures the skills of RUCKUS ICX Network Administrators and covers essential networking concepts. It includes VLAN design and configuration, STP and loop prevention protocols, PoE requirements, basic LAN concepts, Layer 3 routing configurations, and basic QoS concepts. Candidates should be able to demonstrate proficiency in designing VLANs for network segmentation.

>> RCNI Pass Rate <<

Latest RCNI Exam Format | RCNI Authorized Test Dumps

Our Software version has the advantage of simulating the real RCNI exam environment. Many candidates can’t successfully pass their real exams for the reason that they are too nervous to performance rightly as they do the practices. This Software version of RCNI practice materials will exactly help overcome their psychological fear. So you will be bound to pass your RCNI exam since you have perfected yourself in taking the RCNI exam with full confidence.

RUCKUS Certified Networking Implementer Sample Questions (Q20-Q25):

NEW QUESTION # 20
A Wi-Fi access point is configured for management traffic on the default VLAN and a guest SSID on VLAN 10. The access point is connected to port 1/1/10.
What is the correct configuration?

  • A. vlan 10
    tagged ethernet 1/1/10
  • B. vlan 10
    no untagged ethernet 1/1/10
  • C. vlan 1
    no untagged ethernet 1/1/10
    !
    vlan 10
    tagged ethernet 1/1/10
  • D. vlan 1
    no tagged ethernet 1/1/10
    !
    vlan 10
    untagged ethernet 1/1/10

Answer: C


NEW QUESTION # 21
When using zero-touch stacking, which two prerequisites must be in place to ensure all devices join the stack?
(Choose two.)

  • A. enable stacking on all devices
  • B. issue stack disable on intended member devices
  • C. enable stacking on the active controller
  • D. ensure units have clean configurations
  • E. configure each unit's management IP, VLANs, and tagging

Answer: A,D

Explanation:
Zero-touch stacking simplifies the process of forming a stack by automating the configuration. To ensure all devices join the stack seamlessly, the following prerequisites must be met:
* Enable Stacking on All Devices:
* Access each switch's CLI.
* Enter global configuration mode: configure terminal.
* Enable stacking by executing: stack enable.
* Save the configuration with: write memory.
* Ensure Units Have Clean Configurations:
* It's crucial that switches have default configurations to prevent conflicts during the stacking process.
* To reset a switch to its default settings:
* Enter global configuration mode: configure terminal.
* Execute the command: write erase.
* Reload the switch to apply the default configuration: reload.
* Additional Considerations:
* Ensure all switches are running compatible firmware versions to prevent software mismatches.
* Verify that stacking cables are correctly connected to facilitate proper communication between units.
References:
* For a comprehensive guide on building an ICX stack using zero-touch provisioning, consult the RUCKUS Community Forums.


NEW QUESTION # 22
Why is the following command failing?
RKUS-01(config)#vlan 1
RKUS-01(config-vlan-1)#tagged ethernet 1/2/1
Invalid input -> tagged ethernet 1/2/1
Type ? for a list

  • A. This model ICX does not have an interface Ethernet 1/2/1.
  • B. The default VLAN cannot be tagged to any interfaces.
  • C. VLAN 1 must be configured as a protocol-based VLAN before tagged ports can be added.
  • D. A Virtual Ethernet interface must be defined before a tagged port can be added.

Answer: B

Explanation:
In RUCKUS ICX switches, VLAN 1 is the default VLAN and is typically used for management purposes. By default, all ports are members of VLAN 1 as untagged. Attempting to configure VLAN 1 as tagged on a port can result in an error, as the system restricts tagging the default VLAN.
Understanding the Error:
RKUS-01(config)# vlan 1
RKUS-01(config-vlan-1)# tagged ethernet 1/2/1
Invalid input -> tagged ethernet 1/2/1
Type ? for a list
This error occurs because the switch does not allow tagging of the default VLAN (VLAN 1) on any interface.
Resolution:
* Option 1: Use a Different VLAN for Tagging
* Create a new VLAN (e.g., VLAN 2) and configure it as tagged on the desired port.
RKUS-01(config)# vlan 2
RKUS-01(config-vlan-2)# tagged ethernet 1/2/1
* Option 2: Change the Default VLAN ID
* If you must use VLAN 1 as tagged, you can change the default VLAN ID to another VLAN (e.g., VLAN 2), allowing VLAN 1 to be configured as tagged.
RKUS-01(config)# default-vlan-id 2
RKUS-01(config)# vlan 1
RKUS-01(config-vlan-1)# tagged ethernet 1/2/1


NEW QUESTION # 23
By default, how often are VRRP-E hello messages sent from the master?

  • A. every 60 seconds
  • B. every 1 second
  • C. every 5 seconds
  • D. every 3 seconds

Answer: B

Explanation:
In Virtual Router Redundancy Protocol Extended (VRRP-E) configurations on RUCKUS ICX switches, the master router sends hello messages at regular intervals to indicate its active status. By default, these hello messages are sent every 1 second.
Key Points:
* Hello Interval: The frequency at which the master router sends hello messages to backup routers.
* Default Value: 1 second.
* Purpose: To inform backup routers of the master's presence and operational status. If backup routers do not receive hello messages within a specified dead interval, they assume the master is down and initiate a failover.
Configuration:
* Viewing Current Settings:
* To display the current VRRP-E configuration, including hello intervals:
sql
Copy code
show vrrp
* Modifying the Hello Interval:
* To change the hello interval, enter VRRP-E configuration mode for the specific virtual router instance and use the following command:
php
Copy code
vrrp <vrid> advertisement-interval <seconds>
* <vrid>: Virtual Router ID.
* <seconds>: Desired interval in seconds.
Example:
To set the hello interval to 2 seconds for VRID 1:
bash
Copy code
enable
configure terminal
interface ethernet 1/1/1
vrrp 1
advertisement-interval 2
exit
write memory
Considerations:
* Network Stability: Setting the hello interval too low can lead to unnecessary failovers due to transient network issues. Conversely, setting it too high can delay failover detection.
* Consistency: Ensure that all routers in the VRRP-E group have consistent hello and dead interval settings to prevent configuration mismatches.
References:
* Ruckus FastIron Layer 3 Routing Configuration Guide, 08.0.91
* Ruckus FastIron Command Reference Guide, 08.0.70


NEW QUESTION # 24
Why is the following command failing?
RKUS-01(config)#vlan 1
RKUS-01(config-vlan-1)#tagged ethernet 1/2/1
Invalid input -> tagged ethernet 1/2/1
Type ? for a list

  • A. This model ICX does not have an interface Ethernet 1/2/1.
  • B. The default VLAN cannot be tagged to any interfaces.
  • C. VLAN 1 must be configured as a protocol-based VLAN before tagged ports can be added.
  • D. A Virtual Ethernet interface must be defined before a tagged port can be added.

Answer: B


NEW QUESTION # 25
......

If you are determined to enter into RUCKUS company or some companies who are the product agents of RUCKUS, a good certification will help you obtain more jobs and high positions. TestPassKing release high passing-rate RCNI exam simulations to help you obtain certification in a short time. If you obtain a certification you will get a higher job or satisfying benefits with our RCNI Exam Simulations. Every day there is someone choosing our exam materials. If this is what you want, why are you still hesitating?

Latest RCNI Exam Format: https://www.testpassking.com/RCNI-exam-testking-pass.html

Report this page